DIY: Strong and Tough Platform Bed

Make a sturdy platform bed from plywood by spending approximately $60-$90.
Materials Needed:
3 – 2×6 Boards 10′ feet long
1 – 4×4 Post 32″ inches to 40″ inches long
1- 2×4 Stud
12 – Hex Bolts 3/8 by 6″ inches long
12 – Hex 3/8 Nuts
24 – Cut Washers for 3/8 Bolts
1 – 2×4 Stud framing support bracket (pictured)
8 – Screws; 1 1/2″ inches

Tools Needed:
Carpenter Square
Tape Measure
Miter Saw (Recommended)
Electric Drill with Phillips Drill Bit
Long 3/8 Drill bit (6″ inches or over)
1- 9/16 Socket Wrench
1- 9/16 Wrench
Wood Glue

For full instructions go here.