DIY: Laptop Case
Make your own environmental friendly cardboard laptop case and show solidarity to Planet Earth.
First you make design ( Inkscape software- is free), and in this step you can establish design : make a “swellings – pocket” for AC adapter, cable and numerical keypad.
After this be sure you have all materials and tools:
- 1 piece of 3,5mm corrugated cardboard (1600×560mm), or more small pieces , but quite height to not cut components’
- 2 piece of 6mm corrugated cardboard (1600×560mm), or more small pieces … – ” -
- 1 piece of 3mm plywood (70×48mm)
- 1 piece of hemp tape (1500×60mm)
- 8 screws (4×80mm)
- cutter (if you have patience and time ), or a laser cut machine (eeeeee….. wonderful Epilog 
)
- wood/paper glue, transparent after dry,
- boring mill and 3,5mm wimble/drill
- drafting ruler
- pencil
-
For the rest of the post go here.
Rate
Loading ...
